24-hour Hazmat General Site Worker (29 CFR 1910.120)


Duration: 24-hr


Course is designed for workers who are not required to take the full 40-hour training, such as:

Workers on site only occasionally for a specific limited task (such as, but not limited to, ground water monitoring, land surveying, or geophysical surveying) and who are unlikely to be exposed over permissible exposure limits and published exposure limits.

Workers regularly on site who work in areas which have been monitored and fully characterized indicating that exposures are under permissible exposure limits and published exposure limits where respirators are not necessary, and the characterization indicates that there are no health hazards or the possibility of an emergency developing.

For new employees as part of the employer's safety and health program, for employees exposed to health hazards or hazardous substances at treatment, storage, and disposal (TSD) operations to enable the employees to perform their assigned duties and functions in a safe and healthful manner so as not to endanger themselves or other employees.

Prerequisite: None

8-hours of annual refresher training is required

Course meets the following training requirements:

  • 29 CFR 1910.120(e)(3)(ii), CFR 1910.120(e)(3)(iii), & (p)(7)(i)
  • 29 CFR 1926.65(e)(3)(ii), 29 CFR 1926.65(e)(3)(iii), 29 CFR 1926.65(p)(7)(i)
  • Note: It is recommended that each employee enrolled in this class is currently monitored under your company’s medical surveillance and respiratory programs (as applicable). In view of HIPAA laws, we do not ask for medical records.

    Mayday ERI assumes that you are certifying you are in adequate health to perform the training and you waive Mayday ERI of any liability for any medical injuries or illness resulting from this training course.

TOPICS:


  • Regulatory Overview
    • · Laws, Regulations
  • Health, Safety, and Medical Surveillance
    • · General Safety & Health Hazards
    • · Basic Chemical, Toxicological, & Behavior
    • · Medical Surveillance
  • Basic Incident Command System
  • Site Management and Control
    • · Hazard Zones
  • Hazard Identification
    • · Site Characterization and Analysis
    • · Hazard Communication Standard
    • · Global Harmonization Standard
  • Hazard Risk Evaluation
    • · Physical & Chemical Properties
    • · Gas Detection
    • · Monitoring
    • · Sampling Methods and Procedures
    • · Classification, Identification & Verification
  • Information Management
  • PPE
    • · Respiratory Protection
    • · Chemical Protective Clothing
  • Engineering Controls and Safe Work Practices
    • · Standard Operating Procedures
    • · Implementing Emergency Response Plan
  • Control, Confinement, and Spill Management
  • Decontamination
  • Terminating an Incident